Materials
High strength extruded Aluminium section. Hull Fully welded modular construction using MIG argon gas welding process & type 5356 Alloy Welding Wire. Flotation Ability to float in a flooded condition due to the air tight pressure tested double-skinned construction. The hull bottom, sides and transom all form seperate air-tight buoyancy chambers. For example the 4.7mtr Punt will support approxiamately 388kgs over and above its own weight when flooded. Shallow Draft Unladen all punts draw no more than 50mm (2") of water. A heavy duty towing or winch eye is welded under the bow and is accessible from either the inside or outside of the Punt. |
Transom
Transom on all punts is suitably constructed to take long shaft outboard motors of up to 85 Hp. Twin units may be fitted to the 7.3mtr and 8.8mtr punts. The transom is also fitted with a large easily removable drainage bung. Corner Gussets All top inside corners are fitted with four 50mm diameter round tubular brace welded to the sides and foredeck and also sides and transom. They may also be used as towing or mooring points and on the 4.7mtr Punt they serve as lifting points. All other punts have lifting holes located on both sided of hulls. All punts larger than the 4.7mtr must not be lifted from the corner braces. |
Pro Ali Punts are fully operational.
|